Product Overview
The Schneider ELAU VDM01U15AA00 is a PacDrive M MC-4 single-axis digital servo drive corresponding to the technical model MC-4/11/01/400. It is designed for a three-phase 380-480 VAC power supply and provides a rated continuous motor current of 1.5 A, a one-second peak current of 3.75 A and a rated output power of 1.1 kVA.
The MC-4 combines the mains power supply, DC bus, power output stage and digital servo regulator for one machine axis in a compact cabinet-mounted unit. Communication with a compatible PacDrive controller is provided through the Sercos fiber-optic network.
VDM01U15AA00 is the complete commercial reference and should be used as the primary identifier for quotation and replacement. The technical model, firmware, hardware revision, motor type and controller project must all be confirmed before installation.
Main Features
- Exact commercial reference: VDM01U15AA00
- Technical model: MC-4/11/01/400
- ELAU order number: 13130244
- PacDrive M single-axis digital servo drive
- Rated continuous motor current: 1.5 A
- Peak current for 1 second: 3.75 A
- Rated output power: 1.1 kVA
- Three-phase 380-480 VAC mains supply
- 24 VDC control power supply
- Integrated Sercos fiber-optic communication
- Integrated 120 ohm braking resistor
- Natural-convection cooling without an internal fan
- Automatic compatible motor identification
- Single-turn and multi-turn encoder processing
- Inverter Enable safety input
- Compact IP20 cabinet-mounted construction
Technical Specifications
| Model |
VDM01U15AA00 |
| Brand |
Schneider ELAU |
| Series |
PacDrive M MC-4 |
| Technical Model |
MC-4/11/01/400 |
| ELAU Order Number |
13130244 |
| Product Type |
Single-Axis Servo Drive / Servo Amplifier |
| Axis Type |
Single Axis |
| Rated Continuous Current |
1.5 A RMS at 8 kHz |
| Peak Current |
3.75 A RMS for 1 second |
| Rated Output Power |
1.1 kVA |
| Mains Supply |
Three-phase 380-480 VAC, -10% / +10% |
| Supply Frequency |
48-62 Hz |
| Control Supply |
24 VDC, -15% / +25%, 1 A |
| DC Bus Voltage |
530-680 VDC |
| DC Bus Capacitance |
165 uF |
| Braking Resistor Activation |
820 VDC on and 800 VDC off |
| DC Bus Overvoltage Threshold |
860 VDC |
| Internal Braking Resistor |
120 ohm |
| Continuous Braking Power |
50 W |
| Peak Braking Power |
5 kW |
| Electronics Power Loss |
Approximately 12 W |
| Digital Input |
20-30 VDC, approximately 5 mA |
| Inverter Enable Input |
20-30 VDC, approximately 30 mA |
| Input Filter Time |
5 ms |
| Relay Output |
20-30 VDC, maximum 2 A |
| Communication |
Sercos fiber-optic input and output |
| Motor Feedback |
Compatible single-turn or multi-turn motor encoder |
| Firmware Requirement |
V00.22.XX or higher; verify the installed firmware before use |
| Specified Motor Family |
SH055 motor only according to the MC-4 operating manual |
| Cooling Method |
Natural convection |
| Housing Protection |
IP20 |
| Operating Temperature |
5-45 deg C without derating |
| Derated Operating Temperature |
Up to 55 deg C with current reduction |
| Approximate Dimensions |
320 x 100 x 400 mm |
| Approximate Net Weight |
3.1 kg |
| Approximate Packaged Weight |
4.0 kg |
| Lifecycle |
Discontinued legacy product |
Compatible System and Applications
The VDM01U15AA00 is intended for PacDrive M automation systems using a compatible PacDrive controller, Sercos fiber-optic network and SH055 servo motor. Typical applications may include compact packaging machinery, labeling equipment, small conveyor axes, product feeders, filling machinery, printing equipment and automated handling systems.
The MC-4 operating manual restricts the 1.5 A version to firmware V00.22.XX or higher and to the SH055 motor family. Using a motor with an incompatible performance range may generate diagnostic message 138 for an impermissible motor.
Motor suitability must be confirmed from the complete motor model, electronic motor nameplate, encoder system, rated current, holding-brake configuration, cable set and machine controller project.
Maintenance and Replacement Notes
Before replacing the original drive, verify the complete VDM commercial reference, MC-4 technical model, ELAU order number, firmware version, hardware revision and PacDrive controller project. Do not assume that the AA00 suffix confirms a suitable firmware version.
Read the installed firmware directly from the drive or controller diagnostics. The 1.5 A MC-4 must use firmware V00.22.XX or higher. Also confirm that the connected motor is an approved SH055 configuration.
Record the two-digit Sercos address set by the front rotary switches and back up the machine program before disconnecting the existing drive. Verify the direction and condition of both Sercos fiber-optic cables.
Check the three-phase 380-480 VAC mains supply, 24 VDC control power, protective earth, DC bus, motor cable, encoder cable, holding-brake wiring, motor-temperature input and Inverter Enable circuit.
After replacement, verify the complete safety circuit, motor direction, machine limits, braking distance and axis operation before returning the equipment to production.
Related Models
VDM01U15AQ00 is a related 1.5 A commercial reference associated with the V00.22.XX firmware family. It shares the MC-4/11/01/400 current and voltage platform but should still be matched by complete commercial reference, firmware, hardware revision and machine project.
Related higher-current MC-4 families include VDM01U30AA00 at 3 A, VDM01U50AA00 at 5 A, VDM01D10AA00 at 10 A, VDM01D22AA00 at 22 A and VDM01D50AA00 at 50 A. These models have different current capacities, supply requirements, dimensions and motor compatibility and are not direct substitutes.
Inquiry and Supply Notes
Please provide high-resolution photographs of the complete drive nameplate, firmware information, front panel and electrical connectors when requesting a quotation. Also provide the complete SH055 motor model, PacDrive controller model and information about the installed machine project.
The commercial reference, technical model, firmware, hardware revision, motor compatibility, Sercos configuration, product condition, testing status, included accessories, availability and delivery time must be confirmed before quotation.
|
|
Schneider ELAU VDM01U15AA00 PacDrive MC-4 Single-Axis Servo Drive Images
|
