Product Overview
The Yaskawa CIMR-VU4A0005FAA is a V1000 compact current-vector variable frequency drive designed for 380-480 VAC three-phase industrial power systems. It provides a Normal Duty rating of 3 HP at 5.4 A and a Heavy Duty rating of 3 HP at 4.8 A. Although both duty selections carry the same nominal horsepower designation, the available continuous output current and overload profile are different. The final duty selection should therefore be based on the motor nameplate current, acceleration demand, load inertia and operating cycle rather than horsepower alone.
This model is suitable for compact machinery requiring stable speed regulation, controlled acceleration and deceleration, motor protection and repeatable low-speed operation. Typical applications include conveyors, packaging machines, small mixers, feeders, pumps, fans and general material-handling equipment. Its compact IP20/NEMA 1 construction is intended for installation in an appropriate indoor electrical cabinet or protected industrial area.
Main Features
- 380-480 VAC three-phase input for industrial power distribution systems
- Normal Duty rating of 3 HP and 5.4 A
- Heavy Duty rating of 3 HP and 4.8 A
- Open Loop Current Vector, V/f and PM Open Loop Vector control
- Normal Duty overload capacity of 120% for 60 seconds
- Heavy Duty overload capacity of 150% for 60 seconds
- Built-in braking transistor for use with a correctly selected external resistor
- Built-in RS-422/485 serial communication supporting MEMOBUS/Modbus
- Maximum standard output frequency up to 400 Hz
- Programmable digital and analog control functions for machine integration
Technical Specifications
| Manufacturer |
Yaskawa |
| Complete Model |
CIMR-VU4A0005FAA |
| Series |
V1000 |
| Product Type |
Compact Current Vector VFD |
| Input Voltage |
380-480 VAC, Three-Phase |
| Normal Duty Rating |
3 HP, 5.4 A |
| Heavy Duty Rating |
3 HP, 4.8 A |
| Control Methods |
Open Loop Current Vector, V/f, PM Open Loop Vector |
| Overload Capacity |
ND 120% for 60 s; HD 150% for 60 s |
| Protective Design |
IP20 / NEMA 1 |
| Braking Transistor |
Standard Built-in |
Compatible System and Applications
The CIMR-VU4A0005FAA can control compatible three-phase induction motors and appropriately configured permanent-magnet motors. It is commonly used where a PLC, relay circuit, local keypad, analog reference or serial network provides the run and speed commands. Motor current, base frequency, rated speed, pole count and control method must be entered according to the actual motor data. PM motor operation requires additional motor-specific parameter confirmation and should not be treated as a direct induction-motor setup.
Maintenance and Replacement Notes
For replacement work, verify the complete code CIMR-VU4A0005FAA rather than only V1000 or VU4A0005. Confirm the input voltage class, phase, ND or HD selection, motor full-load current, terminal assignments, braking resistor, communication settings and machine parameter set. Back up the existing parameters before removing a working drive whenever possible. Inspect the motor cable and insulation before energizing the replacement, because an output short circuit or ground fault can damage the new unit.
GA500 is the principal migration platform for many V1000 applications. DriveWizard Industrial can assist with parameter conversion, but the converted project must still be reviewed for terminal logic, safety wiring, communication options and application-specific functions.
Related Models
Related 480 V V1000 models include CIMR-VU4A0004FAA, CIMR-VU4A0007FAA, CIMR-VU4A0009FAA and CIMR-VU4A0011FAA. These models are not interchangeable solely by physical appearance; compare rated output current and duty selection before replacement.
Inquiry and Supply Notes
Please provide the complete nameplate model, motor nameplate data, required quantity and application details when requesting a quotation. If this unit is being used as a replacement, photographs of the existing drive label and terminal wiring can help verify the correct electrical and mechanical configuration.
|
|
Yaskawa CIMR-VU4A0005FAA V1000 VFD 480V 3-Phase 3HP 5.4A NEMA 1 Images
|
