Product Overview
The Dynisco TPT463E-7.5M-6/18 is a combined pressure-and-temperature model with a nominal 0 to 7,500 psi pressure range. It combines a 3.33 mV/V pressure bridge with a removable Type J thermocouple and is intended for melt-processing equipment requiring pressure and temperature information from one installation point.
This corrected model does not assume a Type K thermocouple. If the installed nameplate shows a special temperature-element suffix, that complete suffix must be supplied and verified separately.
Main Product Information
| Model | TPT463E-7.5M-6/18 |
| Pressure Range | 0 to 7,500 psi |
| Pressure Output | 3.33 mV/V nominal |
| Temperature Input | Type J thermocouple, standard configuration |
| Thread | 1/2-20 UNF |
| Mechanical Form | Rigid stem plus flexible capillary |
| Process Temperature | Maximum diaphragm temperature up to 400 degrees C |
Application Positioning
The 7,500 psi range sits between common 5,000 and 10,000 psi configurations. It may provide suitable measurement resolution where normal operating pressure exceeds a 5,000 psi range but does not require a 10,000 psi full scale. Final selection must account for pressure peaks and required overload margin.
Typical Applications
- Extrusion dies and melt lines
- Polymer filtration equipment
- Compounding and pelletizing systems
- Plastic sheet and profile production
- Process troubleshooting and replacement projects
Replacement Checklist
Confirm the full-scale range, temperature-element type, stem and flexible length, connector, process thread, pressure excitation and receiving-instrument scaling. Do not substitute a K-type temperature input unless the complete installed model and wiring prove that configuration.
Inquiry and Supply Notes
Send the nameplate and original wiring information for exact configuration review. Special suffixes and nonstandard temperature options require separate verification.
